Quick Charge 3.0 Car Charger, 12V/24V 35W QC3.0/2.0 USB Charger Socket, 3 USB Charger Socket Power Outlet Fast Charge with Wire Fuse Aluminum Car Boat Marine ATV Bus Truck Golf Cart and More(Black

Bought this to replace the USB charging ports which came with a Marine type faceplate unit. the Marine unit cheap USB ports would only deliver a total of around 2 amps.After swapping this one in, I haven't noticed any issues while pulling over 3 amps. Worked well with fast charge test on devices like Samsung. Samsung phone read fast charging 2+ amps, although I don't regularly use one.Charged an Iphone 7, a Mophie power bank (2.3 amps) and Vuse Vape (.400 amp) all at the same time.I Tested the amps being pulled by the iPhone 7 and the beginning amps were between 900 mah to 1 amp. This is with a battery down to 17%. I Expected the amps to be around 1.2-1.3 and then leveling off to around 900 mah later as the battery charged up past 50%.While this is a good all around charger which is built well and can charge Samsung phones super fast (as mentioned above) it's slow on the I-phones. I don't know why the iPhone doesn't seem to like this particular charger. It could have something to do with QC 3.0 circuitry.The manufacturer listed the iPhone as only "normal charge" but in my experience the charge doesn't even perform to the "normal charge" level. I've seen the amps drop all the way down to 600 mah (battery under 75%).This means a majority of the time, the iPhone was charging 20% to 30% slower than with a standard charger at nearly all times. It performed this way with other things charging or by itself.Your iPhone is going to take a while longer to charge than you are used to. I'm going to have to deduct a star from the review due to this, unless an improved version is tested to fix the iPhone issue.As far as the casing, it was aluminum. It's hard to tell though because it is thin and almost plastic-like.Overall seems decent, 3 ports is also convenient.EDIT: 11/20/21 2 top ports started delivering very little power. Now the 2 ports are basically dead. Only the 1 QC3 port is working as it should. Little pricey for the time it has worked. Guess the aluminum shell didn't make it last that long after all.

It’s easy to install and it charges my phone quickly while using the gps on-screen and listening to music.I like the color, aluminum casing, and port plug.Did not include a nut to lock into place. Be careful you don’t pull it out.

I don’t do reviews normally but felt I needed to say something. I purchased this in July. I just now went to install it and found that it was doa. I had power to to plug from my old power port. But the usb ports were inactive. So I took it apart and found that there are 8 solder joints combining a small mainboard and the usb port board which is as a 90 degree angle from the main board. All of the solder joints we cracked through. I repaired them and only the QC green port works. I like the design and would like to try another. Hopefully it wont be broken on arrival. I will report back after receiving the new one.EDIT: replacement part works as expected. Have used it a couple months now and no issues. Charges our devices quickly! Changing stars to reflect.

This car charger was purchased for our son's Van that has been converted into a long range distance camper. The van desperately needed some additional 12 volt plugs and this was the answer! The input allows for 24-12 so it can be connected to our handheld 18v tool batteries to make portable. Having Three ports with a QC3.0 makes this plug worth its weight in toilet paper or ground beef during the pandemic! the thick rubber plug is ideal for covering the ports when not in use. We are going to purchase a couple more to power usb devices throughout the van without having to run long usb cables.

Awesome product. I had 2 remo e my lighter since i dont use it

Changed out a power outlet on my 03 Tahoe for this and it works great. Have constant power to it so no need to crank the truck to charge things with it.Going to add one more in the rear of my tahoe an a few family members wants me to put some in their vehicles tooOnly bad thing I can say which wasn't a big deal to me at all was the outlet was slightly bigger than the old one I replaced so I had to trim the opening some, an the part that screws onto the back was kinda big so I had to trim a little off the back of my panel.Been installed for a month now and no issues at all!

Installed it in my car to an accessory fuse and it works fine. The install requires a hole about 1 1/8 inch diameter to fit into. The housing is solid, not plastic. If you hook it directly to 12 v and not to an accessory fuse it will stay lit all the time. I used a JABINCO12V Car Add-a-Circuit Fuse TAP Adapter Mini ATM APM Blade Fuse Holder I purchased on Amazon and connected it to an open accessory fuse. It can also be connected to an existing accessory circuit using the same adapter. Didn't take very long to install about 45 minutes including drilling the opening for it. It may take more or less time depending on where it's installed and how far the wiring has to go.

I like! Easy to install. Use a 1 1/8 inch spade bit or hole saw. It was a tight fit with my spade bit, but after filing the burs it slid in just fine. It comes in blue which matches my interior. The light on it is quite dim, really just bright enough that you can see the ports at night. I really like the aluminum housing.My one complaint is that the ports are upside down from the standard USB direction. I’ll probably end up flipping it myself and just having upside down lettering.

J’ai remplacé mon allume cigarette par ce chargeur dans ma 2004 Corolla. J’ai du faire une petite modification mais ça s’est très bien installé.

Très facile à installer sur mon Suzuki v-strom 650 2020, il a fallu agrandir un peu le trou de la prise 12v.Par contre il n'a pas été branché directement sur la batterie pour éviter qu'il y ait toujours du courant (en cas d'oubli d'un accessoires branché).Semble étanche, le bouchon en caoutchouc est assez serré.J'ai mis 4 étoiles car les instructions sont absentes

Works well for charging. I had to enlarge the mounting hole from the previous USB port I was using. It wasn't a problem in my application, but may not work for some.